LCD UNIVERSAL CHARGER
CHARAGERS OF THE PRODUCT:
1.Suitable for the recharging of Li-ion mobile batteries with the capacity of and belov 2000mAh.
2.High performance power switch is contained inside,with the range of electric voltage from 110-240V.
3.With Intelligert LCD status display,so that the process of charging more accurate and clear.
4.Recharging and discharging is controlled by micro computer chip,with high speed and efficiency,and automatic shut-down function when recharging is completed.It is safe and reliable.
5.The size and weight of it are suitable for carrying around.Suitable to most Li-ion mobile batteries with the electric voltage 3.6V or 3.7V.
6.With the intelligent inside circuitry,it can automatic transform the charger output polarity to suitable for the battery anode and cathode.
USING INSTRUCTIONS:
1.Put the battery into the charger and adjust the clips on the charger until they are the connected properly.If the LCD screen is on,it shows connecting well;If not,please adjust the clips on the charger contact with the battery,until the LCD screen can turn on.
2.Connect the charger with the power,it presents a photo of battery on the LCD screen,and four panes power is flickering by return from left to right in the battery photo,that means the charger is on.
3.Until the battery is full of power,the four panes power dont flicker and present on the LCD screen,this means finished,if using not urgertly,youd better continue to charge 1-2 hours to ensure its best charging effect.

LCD UNIVERSAL CHARGER II
Charger Descriptions:
For rechargeable Li-ion moblie battery below 2000mAh
High performance power switch inside,with the voltage from 110 to 240V
LCD vision with flashing functions.
Micro computer chip with high speed,efficiency,and automatic shuff-down function
Small size,low weight,easy to carry out.Applicable to the majority of 3.6V Li-ion recha rgeable mobile phone batteries.
USING INSTRUCTIONS:
1.Adjust the two pins,make sure connect the anode and cathode of the battery with the two pins correctly,while the LCD screen become blue,it can work,otherwise,connect it again.
2.Connecting the charger with AC,while the LCD is blue and flashing,it means it is charging.
3.When the battery fully charged,LCD will not flash,in order to get it well,keep to charge 2 hours more.